Best Screws for Plywood

SaleBestseller
Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500 Count - SML-C1 - 500
  • Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting
  • Flat-bottom head and smooth shank draw the pocket-hole joint together tightly
  • Case-hardened steel won’t bend, snap, or break
  • Coarse threads for softwoods, such as pine; and for plywood, MDF, particleboard
  • Maxi-Loc washer head for standard Kreg pocket holes
Bestseller
Small Screw, BLUELEC Antique Style Finish Wood Screws for Fastening Plank, Plastic Materials or Resin Plywood, 45° Flat Head, Phillips Drive, 100pcs, (2.5×6mm, 0.1×0.23inch, Black)
  • 【Widely Applications】Flat head tiny screws are widely used in woodworking, gardening and decoration replacement.
  • 【Material】The colored oxide finish offers mild corrosion resistance and lubricity. It's made of Convenient, usable, but very lightweight material.
  • 【Sizes】- Length: 0.23inch/6mm - Nut diameter: 0.2inch/5mm - Thread diameter: 0.01inch/2.5mm
  • 【Feature】The Phillips drive has an x-shaped slot that accepts a tiny Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.
Bestseller
KIPA Adjustable Clutch Drywall Tool for Electric Drill to Screwgun Converter Screw Depth Setter w/Manganese S2 Phillips 2 Screwdriver Bit, Countersink Plywood Deck PH2 Screws, 1/4 Shank Fits Corded C
  • Easy Depth Adjustment-Set drywall, plywood and deck screws just right for depth. Enables to sufficiently countersink and counterbore screw heads precisely into any panel products. Depth adjustment works very easily and precisely with two threaded aluminum collars, main collar works as a stopper and the locknut collar as friction lock. (Stopper collar may leave a circular mark on the piece being worked on so it is recommended to work primarily on unfinished surfaces with screw setter tools)
  • Universal KIPA Adjustable Clutch drywall tool kit Converts Any electric Drill Into A powerful Screwgun – ¼ quick-change shank is designed to work with POWER DRILLS or HAND DRILLS, and reduces slipping in standard drill chucks (max. 2500 RPM)
  • Removable and Replacebla-No need to replace the entire tool, most standard 1/4 hex 1" bits fit in. 5pcs of 1” Phillips #2 REAL IMPACT BITS come in the package. These bits are MAGNETIZED and easy to work with. Manganese Phosphate Coated bits offer excellent wear resistance and they are corrosion proof even in humid climates.
  • Build-In Clutch-disengages from drive-in function while reaching the workpiece. line up the screw, put this driver on the screw, then start drilling. It'll click when it reaches the depth, but if you lift off now it'll strip the screw a little. Instead, let the drill stop, then lift. The clutch is position sensitive, so it disengages when it hits the wood, but reengages when you lift off. Takes a couple tries to get used to, but not complicated
  • Important Noitce: C-ring built inside of the chuck holds the bit tightly. Please use pliers to pull off the bit if it needs to be replaced.
Bestseller
KREG SPS-F075-100 Pocket Screws, 3/4" #6 Fine-Thread, Pan-Head (100 Count), Zinc
  • Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting
  • Flat-bottom head and smooth shank draw the pocket-hole joint together tightly
  • Case-hardened steel won’t bend, snap, or break
  • Fine threads for hardwoods such as oak, cherry, maple
  • Pan-head screws for use with Kreg Micro-Pocket pocket holes
Bestseller
Kreg SML-C125B-100 Blue-Kote WR Pocket Screws - 1-1/4-Inch, 100 pack
  • Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting
  • Flat-bottom head and smooth shank draw the pocket-hole joint together tightly
  • Case-hardened steel won’t bend, snap, or break
  • Coarse threads for softwoods, such as pine; and for plywood, MDF, particleboard
  • Maxi-Loc washer head for standard Kreg pocket holes
Bestseller
Rok Hardware #8 x 1/2" Standard Thread Truss Head Screws Wood Work MDF Zinc (100)
  • Used For Many Wood Working Needs
  • Diameter: #8
  • Length:1/2 in
  • Drive Phillips #2
Bestseller
WoodPro Fasteners AP8X112-5 T20 5-Pound Net Weight 8 by 1-1/2-Inch All Purpose Wood Construction Screws, 1050-Piece
  • No.8 by 1-1/2-Inch, Includes One 25mm T-20 Star Bit
  • T-20 Star Drive, Torx(tm) Compatible
  • Sharp Type-17 Point
  • PPG Industries 1,000 Hour E-Coat
  • 5LB NET WT, Approx. 1,050 Pieces
Bestseller
Kreg SML-C125-100 Pocket Screws, 1-1/4" #8 Coarse-Thread, Washer-Head (100 Count)
  • Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting
  • Flat-bottom head and smooth shank draw the pocket-hole joint together tightly
  • Case-hardened steel won’t bend, snap, or break
  • Coarse threads for softwoods, such as pine; and for plywood, MDF, particleboard
  • Maxi-Loc washer head for standard Kreg pocket holes